Ask the Experts

[joshtseng]

Hi Inari,

Use the HSRP-address as the in-path gateway.  Also note that simplified routing is not necessary if every local host is on the same subnet and also using the HSRP-address as their gateway.

Josh

[Inari]

Hello,

would be great if you can ask the following question:

Scenario:

I have got 2 Cisco-routers (each has one WAN-link connected) which are running HSRP. I'd like to deploy a SH-5050 (InPath0 to one Router and InPath1 to the other Router).

The addresses of the router-Interfaces:

Router A: 10.15.20.1 / 24

Router B: 10.15.20.2 / 24

HSRP-Adress: 10.15.20.3

Which IP-address has to be configured as the InPath-Gateway of the Riverbeds? Is it the "physical" address or the HSRP-Address?

Thank you very much for your answers in advance!

Best regards

Inari